Your needs, this model
Does it fit your priorities?
Does this supplied pair combine 100 pounds per hand with a five-pound starting selection?
Yes. The complete S 5100 lists the whole 5–100 lb nominal ladder, without a future kit being counted as supplied.
Explore this need in the finder →Does the five-to-100-pound ladder include 2.5-pound gaps?
No. The official user selections are five pounds apart despite the mechanism's internal half plates.
Explore this need in the finder →Can I require an exact 90-pound selection and at least 4.25 inches of listed grip length?
Yes. Ninety pounds is explicitly listed, and the handle specification gives 110 mm of grip length.
Explore this need in the finder →The NÜOBELL S 5100 is NÜO's current US S-series pair with a nominal range of five to 100 pounds per dumbbell. It suits a home user who already needs heavy selections while retaining a light starting point and handle-based changes. It is a complete model, rather than an assumption that any earlier NÜOBELL can accept enough extra plates to reach the same number.
Twenty settings, all on the same stated ladder
The official weight list provides five-pound steps from five through 100 pounds. That is twenty nominal selections in each hand. An exact 50, 70 or 90 pounds is listed; an exact 7.5 or 12.5 is not. Consider the size of the gaps at the light end, where an additional five pounds can represent a large proportion of the previous selection.
The manufacturer sells the system as a pair and supplies the selection cradles. The combined nominal maximum is 200 pounds, but that number should never be substituted for the one-hand ceiling. The published tolerance permits up to five percent variation from the selected marking, so treat the displayed values as nominal selections.
The S construction is a specific series
NÜO describes four shifting half plates, thicker plates, stainless-steel V-connectors and a redesigned aluminum handle. Those details distinguish the S 5100 from the original 580. The complete construction still combines materials, and the manual's restrictions on impact and dropping continue to apply.
The handle's listed diameter is 32 millimeters and its grip length is 110 millimeters. The opening remains finite even though it is free of a surrounding cage. Check the way your hand sits between the end structures and any grip accessories you expect to use. Choosing a higher maximum does not automatically solve a grip-fit issue.
The heavier station needs its own space
The current page lists product dimensions of 548 millimeters long, 181 high and 200 wide. It does not separately identify a bare loaded assembly and a cradled envelope. That distinction matters when a comparison table from another retailer uses a different convention. Ask for the exact clearance measurement needed instead of using the most favorable number found under the same brand.
Both cradles need stable, level positions that allow the handles to seat and lift vertically. The unused plates remain there when a light load is selected, so a smaller selected dumbbell does not eliminate the station's storage footprint. Plan enough room beside a bench for the whole change sequence, not merely somewhere to park the pair afterward.
Buying complete versus expanding an S 560
NÜO explicitly describes its S expansion kit as converting the S 560 into the S 5100. That is a supported route for an owner of the specified smaller system. The completed endpoint is the same named model, so buying the kit does not create an additional supposedly different 100-pound product for comparison.
For a new buyer who needs more than 60 pounds now, the complete S 5100 makes the present requirement clear. For an existing original-series 550 or 580 owner, the S kit is not evidence of cross-series compatibility. Confirm the model and components before purchasing an expansion. A stand, a color option or a warranty extension also does not add selectable weight.
A quick selector remains a mechanical lock
The current S manual explicitly lists S 5100 and shows its assembly and operation. It requires checking that selected plates engage correctly and following the locking tests. Weight changes belong in a fully seated cradle; a selector should not be forced. Damage, impact or incomplete engagement requires stopping use and obtaining the specified service assessment. Do not turn the ability to change quickly into a reason to skip checks.
The 100-pound Pro 100 EXP knurled configuration is a selector-based alternative with a different grip opening and micro-weight routine. The 120-pound Ironmaster arrangement provides a higher ceiling through manually moved plates. Their different changing methods can matter more than the extra maximum for a particular session.
Choose the S 5100 when its complete five-to-100-pound ladder, open grip and cradle-based operation fit together. If 60 pounds covers the present work and a later upgrade is preferable, the S 560 preserves that specific supported route.
Key details at a glance
| Starting load used for comparison | 5 lb per hand |
|---|---|
| Included maximum | 100 lb per hand |
| Weight change | twist |
| Supplied grip surface | knurled |
| Grip diameter | 32 mm |
| Supported upgrade beyond this package | No |
| Supplied configuration | Two complete S 5100 dumbbells with selection cradles. The maker explicitly names S 560 plus its matching S expansion as the same complete endpoint. |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
Put the lightest and heaviest loads together.
Add the adjustment method, an exact selection or a grip requirement when it matters.
