Your needs, this model
Does it fit your priorities?
Can I require one hundred pounds per hand with a soft TPR grip?
Yes. This exact TPR package supplies all four Pro 100 EXP stages.
Explore this need in the finder →Can I require a further compatible capacity upgrade beyond this pair?
No. The supplied Stage 4 is the last documented Pro 100 EXP capacity expansion.
Explore this need in the finder →Does it offer gaps no larger than 2.5 pounds across its complete supplied ladder?
No. The documented list still has five-pound steps, including ninety to ninety-five pounds.
Explore this need in the finder →The hundred-pound TPR Pro 100 EXP pair supplies the entire residential expansion system with the manufacturer's cushioned handle option. Its purpose is straightforward: reach one hundred pounds per hand now without choosing knurled metal or ordering another capacity stage later. That is a substantial purchase configuration, and its full range is useful only if its selection routine and actual intermediate loads fit your household.
All stages, with a five-pound starting handle
The official US TPR / 100 LBS purchase option is sold as a pair and includes the starting nest plus Stages 2, 3 and 4. The manual identifies Stage 4 as the final expansion from eighty to one hundred pounds per dumbbell. This is the documented endpoint for compatible Pro 100 EXP capacity upgrades.
Both supplied 2.5-pound micro weights can be removed for a five-pound handle. One installed gives 7.5 pounds and both give ten. Plate selection adds the nested stack. The published upper ladder contains eighty-five, 87.5, ninety, ninety-five, 97.5 and one hundred pounds, leaving a five-pound gap after ninety. At the low end, ten to fifteen is also a five-pound step. A requirement for every 2.5-pound value therefore calls for a different ladder, not an assumption about this model's micro weights.
Understand what the TPR option changes
PowerBlock describes TPR as more cushioned and less abrasive than its knurled grip. This version can be the right choice when softer contact is a clear preference and the complete heavy system is genuinely needed. It does not promise less fatigue, solve a hand condition or change the load rating. The documented difference is the supplied grip surface.
The current page's numerical grip dimensions accompany its knurled stainless steel specification. Exact TPR grip diameter and length remain unknown here. If that detail is essential, confirm the TPR specification with the manufacturer before ordering. The hundred-pound knurled pair is the direct comparison when textured metal and its stated measurements are preferable.
Two controls govern the weight change
The magnetic selector pin chooses the external plates. The Auto Lock lever allows separate changes to the internal handle weights. For some transitions you will therefore remove the handle and change micro weights as well as reposition the pin. The manual requires the lock closed before use, full correct selector engagement and an intact tether attached to the top rail.
Think about a representative session: if most changes are between main rail positions, the plate selector does the work. If your usual progression repeatedly needs a partial handle load, there is another handling step. A maximum weight comparison alone does not describe that difference in daily use.
Make space for the full system
The page lists 19.21 by 7.63 by 7.72 inches for the fully expanded knurled model, in length, width and height order. Confirm a separate exact TPR footprint before choosing a tight storage space. Allow access for both nests, pin movement and a straight upward removal and return path, with any optional stand measured separately.
The owner's manual warns that rotating a handle sideways during removal can jam the assembly. It calls for a short initial lift to check selection before use. Avoid a storage position that forces you to pull at an angle, and do not use a jammed stack. Place the equipment on a stable supported surface and keep the surrounding working area clear.
Is the final stage worth supplying immediately?
The eighty-pound TPR package leaves the last expansion for later and is a useful alternative when that load meets your current needs. The full hundred-pound version is more appropriate when the final stage has an immediate purpose. Dedicated Pro 100 barbell and kettlebell attachments are separate purchases, not additional included capacities or proof of compatibility with other PowerBlock generations.
Ownership still involves inspecting the pin, magnets, tether, grips and hardware, plus gentle cleaning and the stated maintenance schedule. The manual prohibits dropping or striking the dumbbells together. Choose this residential EXP package for its actual heavy range and TPR surface, while keeping its nonuniform ladder, unconfirmed TPR fit measurements and handling restrictions in view. An unknown used Commercial Pro 100 is a different product and must be checked against its own recall information.
Key details at a glance
| Starting load used for comparison | 5 lb per hand |
|---|---|
| Included maximum | 100 lb per hand |
| Weight change | selector_micro |
| Supplied grip surface | soft |
| Supported upgrade beyond this package | No |
| Supplied configuration | TPR pair, all four capacity stages and two 2.5 lb micro weights per handle. Stands and format-changing attachments are separate. |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
Put the lightest and heaviest loads together.
Add the adjustment method, an exact selection or a grip requirement when it matters.
